Shop By Type

Shop By Type

Browse POS hardware by category at POSRG Outlet. Find barcode scanners, receipt printers, cash drawers, touch monitors, and terminals all in one place.

Every listing is inspected before it ships, so you can outfit a new location or replace a single failed unit with confidence. Start with a category above, or search by part number if you already know exactly what you need.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • A top-down, full-frame studio shot of the top side of a green Raspberry Pi 3 Model B+ single-board computer. The circuit board is oriented vertically, showing its complex architecture of chips, connectors, and gold-plated mounting holes. Core Components and Labeling Processor: A prominent square Broadcom BCM2837B0 chip is centered, featuring a silver metal heat spreader for thermal efficiency. Wireless Module: To the upper right of the processor, a silver metallic shield embossed with the Raspberry Pi logo houses the dual-band Wi-Fi and Bluetooth hardware. Official Branding: White silk-screened text to the right of the processor reads "Raspberry Pi 3 Model B+" and "© Raspberry Pi 2017." Connectivity and I/O Top Edge: Contains a vertical DISPLAY ribbon cable connector. Left Side: Features a micro-USB power input, a full-size silver HDMI port, a vertical CAMERA ribbon cable connector, and a black 3.5mm audio/composite video jack. Bottom Edge: Includes a silver metallic RJ-45 Ethernet jack and two stacked pairs of dual USB 2.0 Type-A ports (totaling four ports) with silver housings stamped "GCT." Right Side: A 40-pin GPIO male header strip with black pins runs along the entire length of the board, accompanied by a small 4-pin PoE header near the bottom. Technical Details The green PCB is populated with numerous small surface-mount components, including resistors and capacitors. Small white status indicator LEDs labeled "PWR" and "ACT" are visible in the upper-left corner. The entire unit is isolated against a clean, solid white background. An eye-level, close-up studio shot focusing on the input/output ports of a Raspberry Pi 3 Model B+. The green circuit board is positioned to showcase the metallic connectivity hardware along the front edge. Visible Ports and Features: Ethernet Port: On the left, a silver metallic RJ-45 Ethernet jack is prominent, featuring two small indicator LEDs integrated into the bottom corners of the port. USB Ports: To the right of the Ethernet jack are two stacked pairs of USB 2.0 Type-A ports (four ports total). The silver metal housings are stamped with the "GCT" manufacturer logo. Background Detail: The image uses a shallow depth of field, blurring the main processor with its silver heat spreader, the 40-pin GPIO header on the right, and the HDMI port in the distance. PCB Markings: Small white silk-screened labels and copper contact points are visible on the green board near the base of the connectors. The device is isolated against a solid, seamless white background.
    Quick view

    Raspberry Pi 3 Model B+ Single-Board Computer - 1GB RAM - Bluetooth - Wireless - HDMI

    Raspberry

    $39.99
    The Raspberry Pi 3 Model B+ is the final evolution of the Raspberry Pi 3 range, providing a powerful, credit-card-sized solution for everything from industrial applications to hobbyist DIY projects...
    $39.99
    Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $39.99
    Subtotal:
  • A top-down, slightly angled studio shot of the top side of a green Raspberry Pi 3 Model B V1.2 single-board computer. The PCB is densely populated with integrated circuits, connectors, and surface-mount components. Key Components and Connectivity: Central Processor: A large black Broadcom BCM2837 chip is situated in the center-right of the board. Memory/Controller: A smaller square black chip is located to the left of the main processor. Left Edge Ports: Features a silver metallic RJ-45 Ethernet jack and two stacked pairs of dual USB 2.0 Type-A ports. Top Edge Ports: Includes a black 3.5mm audio/composite video jack, a vertical CAMERA ribbon cable connector, a silver HDMI port, and a micro-USB power input. Right Edge: Features a vertical DISPLAY ribbon cable connector. Bottom Edge: A 40-pin GPIO male header strip runs along the length of the board. Markings: White silk-screened text identifies the model "Raspberry Pi 3 Model B V1.2," the "Raspberry Pi 2015" copyright, and various component labels like "HDMI," "CAMERA," and "GPIO." The board is presented on a seamless white background, highlighting its intricate technical layout. An eye-level, close-up studio shot focusing on the input/output ports of a Raspberry Pi 3 Model B V1.2. The green circuit board is shown from the front edge, highlighting the metallic connectivity hardware. Visible Ports and Features: Ethernet Port: On the left, a large, silver metallic RJ-45 Ethernet jack is prominent, featuring two small indicator LEDs at the bottom. USB Ports: To the right of the Ethernet jack are two stacked pairs of USB 2.0 Type-A ports (four ports total). The silver metal housings are stamped with "EDAC." Background Detail: The depth of field is shallow, blurring the main Broadcom processor, the 40-pin GPIO header on the right, and the HDMI port in the background. PCB Markings: Small white text labels like "J10" and "USB" are printed on the green board near the base of the connectors. The device is isolated against a solid white background, emphasizing the industrial design of the components.
    Add to Cart
    Quick view

    Raspberry Pi 3 Model B V1.2 Single-Board Computer - Quad-Core CPU - 1GB RAM - Wireless - Bluetooth

    Raspberry

    $34.99
    The Raspberry Pi 3 Model B V1.2 is a compact, credit-card-sized single-board computer, acting as the powerhouse of the third-generation Raspberry Pi line. Released in February 2016, this versatile...
    $34.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $34.99
    Subtotal:
    Add to Cart
  • A top-down, full-frame studio shot of the front of a black Samsung 860 EVO 250GB 2.5-inch SATA III Internal Solid State Drive (SSD). The drive has a matte black finish with the "SAMSUNG" logo in bold, silver-white lettering in the center, and the words "Solid State Drive" printed in a smaller, thinner font directly below it. At the bottom center, there is a small, light gray square accent. On the right edge, a small white arrow points toward the SATA connection side. There is a small piece of white sticker residue or a minor scuff mark on the upper-right portion of the drive's face. The background is a solid, clean white. A top-down, full-frame studio shot of the back of a Samsung 860 EVO 250GB 2.5-inch SATA III SSD. The black casing features a large rectangular sticker in the center containing technical specifications, barcodes, and regulatory logos. Key Information on Label: Model: MZ-76E250 Capacity: 250GB Production Date: 2018.07 S/N: S3YGNC0K738384P Power Rating: DC+5V 1.2A Origin: Product of KOREA The left side of the drive shows the gold-plated SATA data and power connectors. Four silver mounting screw holes are visible at the corners of the black frame. Various certification symbols, including CE, FCC, and VCCI, are printed along the bottom of the label against a white background.
    Quick view

    Samsung 860 EVO 250GB 2.5" SATA III Solid State Drive - MZ-76E250

    Samsung

    $34.99
    The Samsung 860 EVO 250GB (MZ-76E250) is a high-performance 2.5-inch SATA III internal solid-state drive (SSD) designed for mainstream PCs and laptops. Utilizing Samsung's V-NAND technology, it...
    $34.99
    Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $34.99
    Subtotal:
  • This image shows the front panel of a Dell OptiPlex 7020 Micro Form Factor (MFF) desktop computer, positioned vertically against a plain white background. The chassis is matte black with a vented cooling grille on the right side. From top to bottom, the front interface includes: Power Button: A circular button with an integrated LED indicator. Status Lights: Small icons for storage activity and power. Universal Audio Jack: A 3.5mm port for headphones or headsets. USB 3.2 Gen 1 Port: A standard Type-A port with a blue plastic interior. USB 3.2 Gen 2 Type-C Port: A slim, reversible connection port. OptiPlex Branding: A small silver badge located near the center. This image shows the rear I/O panel of a Dell OptiPlex 7020 Micro Form Factor (MFF) desktop computer, displayed vertically against a white background. The rear connectivity and features, from top to bottom, include: Antenna Housing: A black plastic mounting point at the top for an external Wi-Fi antenna. Optional Video Port: A DisplayPort connector installed in the optional slot, secured by two screws. RJ-45 Ethernet Port: Located to the right of the optional port for wired networking. USB Ports: A stack of four USB Type-A ports: Two USB 2.0 ports (top pair) with Smart Power On support. Two USB 3.2 Gen 1 ports (bottom pair) featuring blue plastic interiors. Video Outputs: * One HDMI 1.4b port. One DisplayPort 1.4a connector. Power Connector: A small circular DC-in port at the bottom for the external power adapter. Security & Service Details: * A Kensington cable lock slot and a padlock ring are visible on the left edge. A small sticker at the base displays the Service Tag: 5YKHK44
    Quick view

    Dell OptiPlex 7020 Micro PC - i5-14500T @ 1.70GHz - 16GB Ram - 256GB NVMe - Windows 11 Pro

    Dell

    $499.99
    The Dell OptiPlex 7020 Micro PC is an ultra-compact, high-performance desktop designed for modern business and productivity needs, featuring a 14th Gen Intel Core i5-14500T processor, 16GB of RAM,...
    $499.99
    Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $499.99
    Subtotal:
  • An angled, top-down view of a Lexmark 250-sheet printer tray (part number 40X7645) against a plain white background. The tray consists of a black plastic rectangular frame with a white front handle panel. Inside the tray, there are bright lime-green adjustable paper guides for setting width and length. On the black interior surface, there are embossed diagrams illustrating proper paper loading techniques and orientation. Small blue plastic accents are visible near the rear gear mechanism. The unit is shown at a slight diagonal angle, highlighting the internal sliding components and the curved design of the white front bezel. A low-angle, front-facing view of a Lexmark 250-sheet printer tray (40X7645) against a white background. The front of the tray features a clean, white plastic bezel with a curved handle design and a small square icon on the bottom right corner. The interior of the tray is made of black plastic, featuring bright lime-green adjustable paper length and width guides. The tray is shown slightly tilted, emphasizing the depth of the unit and the mechanical sliding components used for paper alignment.
    Add to Cart
    Quick view

    Lexmark 250-Sheet Printer Tray - 40X7645

    Lexmark

    $49.99
    The Lexmark 250-Sheet Printer Tray Insert (Part #40X7645) is a genuine replacement paper tray designed to restore or maintain the paper handling capabilities of your Lexmark color laser printer. As...
    $49.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $49.99
    Subtotal:
    Add to Cart
  • A professional studio shot of a black Havis mounting pole against a white background. The pole is vertically oriented with a smooth, extruded texture featuring subtle vertical lines. It is seated in a thick, rounded circular base plate cover that conceals the mounting hardware for a clean, industrial look. A rear-angle view of a matte black Havis mounting pole standing on a circular base. The extruded metal pole features vertical grooves, and the rounded base cover includes a small cutout or notch at the bottom for organized cable routing.
    Add to Cart
    Quick view

    Havis 16″ Extruded Pole With Round Base Plate & Cover - MM-10-116

    Havis

    $89.99
    The Havis MM-10-116 16″ Extruded Pole with Round Base Plate & Cover is a premium mounting solution designed for retail, POS (Point of Sale), and technology applications. It provides a sturdy, secure,...
    $89.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $89.99
    Subtotal:
    Add to Cart
  • A front perspective view of a Zebra ZD421c thermal desktop label printer in a dark charcoal gray finish. The device is shown printing a large shipping label that features multiple barcodes, addresses, and tracking numbers. The printer has a rounded, compact design with a prominent top-loading compartment featuring a clear window to view the media roll. On the top face, there is a silver interface panel with five LED status icons and three physical buttons: Pause, Feed, and Cancel. A yellow release latch is visible on the side, and the white Zebra logo is printed on the lower right front corner. A front-and-side perspective of the Zebra ZD421c thermal desktop printer, shown without media loaded. The device features a two-tone gray plastic housing with a matte finish. The top control panel includes a power button on the left and three central buttons for Pause, Feed, and Cancel, topped by a row of five status indicator icons. A yellow release latch is visible on the left side, and the front face contains the exit slot for labels, the Zebra logo in the upper right, and a "Zebra ZD421" model designation on the control panel. The design is compact and rounded, intended for desktop use.
    Add to Cart
    Quick view

    Zebra Barcode Label Printer - ZD421c - ZD4A042-C01E00EZ

    Zebra

    $723.94
    The Zebra ZD4A042-C01E00EZ is a 4-inch wide, 203 dpi resolution desktop barcode printer from the ZD421 series, featuring thermal transfer printing with a ribbon cartridge system. Designed to bridge...
    $723.94
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $723.94
    Subtotal:
    Add to Cart
  • A side three-quarter view of a Lexmark 250-sheet paper tray (model 36S2910). The image highlights the mechanical top surface, showing metal mounting plates, plastic alignment pins, and electrical connectors used for stacking beneath a printer. The unit has a white front panel with a dark gray chassis. A small white "2" is visible on the lower right corner of the gray section. The side of the tray includes a recessed handle area for easy positioning. A three-quarter view from the front-left of a Lexmark 250-sheet paper tray (model 36S2910). The image shows the white front panel and the dark gray side chassis. The top surface features a metal plate with various cutouts and black plastic alignment pins used for mounting a printer on top. A small white number "2" is visible on the bottom right corner of the dark gray front-loading section.
    Add to Cart
    Quick view

    Lexmark 250-Sheet Printer Tray - 36S2910

    Lexmark

    $99.99
    The Lexmark 36S2910 is a 250-sheet input tray designed to enhance paper handling capacity and efficiency for compatible Lexmark monochrome laser printers. This compact accessory allows for, on...
    $99.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $99.99
    Subtotal:
    Add to Cart
  • Front view of a Lenovo ThinkCentre Tiny-in-One (TIO) 22 Gen 4 monitor against a white background. The 21.5-inch display features slim bezels on three sides and shows the Windows 10 desktop with the Start menu open. A webcam is mounted at the top center, and the ThinkCentre logo is visible on the bottom left bezel. The monitor is supported by a height-adjustable black stand with a red cable management accent on the flat rectangular base. An "Intel inside" logo is displayed in the bottom right corner of the image. A front three-quarter view of a Lenovo ThinkCentre Tiny-in-One (TIO) 22 Gen 4 monitor workstation. The screen is turned slightly to the left, displaying an open Outlook email window and a messaging app. The monitor features a top-mounted webcam and a built-in speaker bar below the screen. In the foreground, a black wireless keyboard and mouse are neatly arranged. The entire setup is supported by a black stand with a red cable management accent on the base. An "Intel inside" logo is visible in the bottom right corner.
    Add to Cart
    Quick view

    Lenovo ThinkCentre Tiny-In-One (TIO) 22 Gen 4 21.5" Monitor - 11GSPAR1US

    Lenovo

    $149.99
    The Lenovo ThinkCentre Tiny-In-One (TIO) 22 Gen 4 (11GSPAR1US) is a versatile 21.5-inch modular monitor designed to transform into an all-in-one (AIO) desktop by stowing a Lenovo Tiny or Nano PC...
    $149.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $149.99
    Subtotal:
    Add to Cart
  • Zebra 2" x 1" PolyPro 4000D Thermal Labels - Case of 36 Rolls - LD-R7BL5B - Side 2 Zebra 2" x 1" PolyPro 4000D Thermal Labels - Case of 36 Rolls - LD-R7BL5B - Dimensions
    Add to Cart
    Quick view

    Zebra 2" x 1" PolyPro 4000D Thermal Labels - Case of 36 Rolls - LD-R7BL5B

    Zebra

    $172.22
    The Zebra LD-R7BL5B is a high-performance PolyPro 4000D direct thermal label designed for durability and versatility. These 2" x 1" white matte polypropylene labels are engineered for demanding...
    $172.22
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $172.22
    Subtotal:
    Add to Cart
  • A close-up, angled view of a Zebra DS4608-SR handheld barcode scanner in twilight black. The image highlights the scanner's head and imaging window, showing the Zebra logo on the top surface. It features an ergonomic handle with a black trigger and a ruggedized build, isolated against a white background. A three-quarter view of the Zebra DS4608-SR barcode scanner, shown from a slightly elevated angle. The device is finished in twilight black with a matte texture. The image emphasizes the recessed scanning window and the Zebra logo on the top of the scanner head. The ergonomic handle and trigger are visible against a white background.
    Quick view

    Zebra 2D Barcode Scanner Kit - DS4608-SR7U2100SGW

    Zebra

    $315.23
    The Zebra DS4608-SR7U2100SGW 2D Barcode Scanner is a powerful, versatile scanning solution designed for fast-paced retail environments. This corded kit includes a Twilight Black scanner, shielded USB...
    $315.23
    Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $315.23
    Subtotal:
  • A close-up, angled view of the HP Engage thermal receipt printer in ebony black. This perspective shows the left side and front of the cube-shaped device, revealing two small, square functional buttons (a paper feed and a power/status button) located on the side panel. The metallic HP logo is visible on the flat top surface, and the printer is shown against a plain white background. A three-quarter perspective view from the side of the HP Engage thermal receipt printer. The image highlights the device's compact, cubic form factor and matte black finish. The modern HP logo is visible on the top surface, and the clean lines emphasize its minimalist design. The printer is shown isolated on a white background.
    Add to Cart
    Quick view

    HP Engage Serial Ethernet USB Thermal Receipt Printer - 299U7AA

    HP

    $299.99
    The HP 299U7AA (HP Engage Serial/Ethernet/USB Thermal Printer) is a compact, high-speed POS receipt printer, often in black, designed for retail and hospitality environments. It features 203 DPI, 250...
    $299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $299.99
    Subtotal:
    Add to Cart
  • Total: items /

Adding your products to cart

View Cart Continue Shopping